You are viewing: Wireless Microphones > UNK 400
UNK 400
Code: 6000210
Description
Choose excellent chipset and high quality component,
so that timbre is very good.
All use quartz crystal oscillating circuits,
so the frequency is very steady
Volt indicating circuit in the microphone. It can tell
you if it is necessary to change the battery.
Technical Specifications
| Receiver: |
| Power supply: DC 17V |
| Consumption power: 5W |
| Signal/noise ratio: >90dB |
| Image & spurious rejection: >80dB |
| Border upon channel rejection: >80dB |
| Receiving sensitivity: 5dBuV Sinad=30dB |
| De-emphasis: 50us |
| Handling microphone: |
| Transmitter power: 30 mW |
| Modulation type: fm,f3f |
| Max deviation: +-25KHz |
| Spurious emission: >40dB with carrier |
| Battery voltage: 1.5V x2 |
| Continuous use: 10 hours |
| Comprehensive performance: |
| Frequency stabilization: <+-30ppm |
| Dynamic range: >90dB |
| Total harmonic distortion: <0.5% |
| Frequency response: 40Hz-15KHz +-3dB |
| Audio output level: +-800mV |
Packaging information
| MASTER DIMENSIONS: | 595x408x380mm 23.4x16.1x15 in |
| GROSS WEIGHT: | 21 kg 46.30 lb |
| MASTER PIECES: | 10 PC |
Specifications subject to change without notice
