You are viewing: Wireless Microphones > VNK 200
VNK 200
Code: 6000201
Description
Using multilevel high frequency and mid frequency narrowband lter,
so as to dispel any possible interference signals.
Diversity receiver, these transmission system ensure interference-free
transmission and minimize outs in the RF link, avoid the dead angle.
Special designed circuit on the microphone for clearing up waves of
miscellaneous signals.
With audio compressing-expanding technology, the machine can lower
noise an increase the dynamic range. It can also lower re-echo.
Using VHF 200-270 MHz band to avert interference frequency.
There is a volt indication circuit in the microphone which can tell
you if it is necessary to change the battery.
Longest distance in open: 50m 164ft
Technical Specifications
| Receiver: | Bodypack transmitter: |
| Power supply: DC 17V | Transmitter power: 8.5 mW |
| Consumption power: 4W | Modulation type: fm,f3f |
| Signal/noise ratio: >90dB | Max deviation: +-25KHz |
| Image & spurious rejection: >80dB | Spurious emission: >40dB with carrier |
| Border upon channel rejection: >80dB | Battery voltage: 1.5V x3 |
| Receiving sensitivity: 10dBuV Sinad=30dB | Continuous use: 6 hours |
| De-emphasis: 50us | Noise control: perfectness circuit for eliminating noises |
| Comprehensive performance: |
| Carrier frequency: VHF 200~270MHz |
| Frequency stabilization: <+-30ppm |
| Dynamic range: >90dB |
| Total harmonic distortion: <0.5% |
| Frequency response: 40Hz-15KHz +-3dB |
| Audio output level: +-400mV |
Packaging information
| MASTER DIMENSIONS: | 630x372x400mm 24.8x14.6x15.7 in |
| GROSS WEIGHT: | 11 kg 24.25 lb |
| MASTER PIECES: | 10 PCS |
Specifications subject to change without notice
